Explore the HES3D-W190 Concealed Hinge
The HES3D-W190 is a robust, three-way adjustable concealed hinge engineered specifically for larger, cladded, or thick doors requiring wide clearances and a premium flush finish. Its long-arm design offers a wider throw, making it ideal for doors with cladding, applied panels, or oversized profiles. Despite its strength, the hinge body maintains a thin profile, allowing for a shallow mortise—streamlining installation.
Engineered for both commercial and high-end residential use, it features vertical, horizontal, and depth adjustment post-installation, and a split-type configuration that allows doors to be temporarily hung before final fixing.
Specifications:
-
Opening Angle: 180°
-
Max Door Dimensions: Width 915mm, Height 2440mm
-
Door Thickness: 42mm minimum
-
Weight Capacity: 100kg with 2 hinges, 125kg with 3 hinges
-
Tested Durability: Engineered for high-load, frequent-use commercial environments
-
Mounting Style: Concealed, split-type with wide-throw design
Available Finishes:
Installation Instructions
This technical diagram provides exact positions for screws and adjustment points:
-
Vertical adjustment screws are accessed from the top of both hinge halves, allowing ±3 mm fine-tuning to raise or lower the door after installation.
-
Depth adjustment is made from the face of the hinge and allows for ±1 mm in/out movement.
-
Horizontal adjustment screws are positioned on the side of the door leaf and provide +3 mm / -2 mm of lateral adjustment.
Screw positions and mortise depths are clearly marked for both door and jamb sides to simplify installation.
This drawing shows how the door swings from 0° to 180° using the HES3D-W190:
-
Designed for installations where there’s a 10 mm step between the door and jamb.
-
Helps visualize clearance at different angles, which is critical for ensuring the door won’t hit adjacent walls or fixtures.
Use this chart during planning to anticipate the hinge’s motion range and avoid obstructions.
This diagram outlines the precise mortise layout needed for the HES3D-W190:
-
Mortises should measure 190 mm high × 36 mm wide, set 32 mm from the edge and 10 mm deep.
-
Drill hole positions are provided for reference if you're not using the HES3D-W190-TMP jig.
This image ensures accurate preparation of the door and frame for a flush, secure hinge fit.
CONTACT
Inquiries
For any inquiries, questions or commendations, please call: 08 9333 4999 or fill out the contact form
Navigate
Office & Warehouse
274 Welshpool Road Welshpool, WA 6106
Tel: 08 9333 4999
28 Indian Drive Keysborough, VIC 3173
Tel: 03 9706 8400
© 2025 Nessco Trade Supplies