top of page
HES HINGES

Explore the HES3D-E190 Concealed Hinge

The HES3D-E190 is a high-performance, 3-way adjustable concealed hinge engineered for large interior doors that demand a slim profile and clean, modern finish. Its compact body allows for shallow mortising, making installation faster and less invasive. The split-type design simplifies door hanging and alignment, while integrated 3D post-installation adjustability ensures precise final positioning—vertically, horizontally, and in depth. With a 180° opening angle, ANSI and ULC fire safety certification, and a tested load capacity of up to 125kg, the E190 delivers both elegance and endurance for premium residential or commercial projects.

Specifications:
  • Opening Angle: 180°

  • Max Door Dimensions: Width 900mm, Height 2400mm

  • Door Thickness: 38mm minimum

  • Weight Capacity: 100kg with 2 hinges, 125kg with 3 hinges

  • Tested Durability: 300,000 open/close cycles

  • Mounting Style: Concealed, split-type with wide-throw design

 

Available Finishes:
Screenshot 2025-06-17 101555.png

Installation Instructions

Screenshot 2025-06-17 091737.png

This technical diagram provides exact positions for screws and adjustment points:

  • Vertical adjustment screws are accessed from the top of both hinge halves, allowing ±3 mm fine-tuning.

  • Depth adjustment is accessible from the face of each hinge half—allowing minor in/out changes post-installation.

  • Horizontal adjustment screws are located laterally on each hinge segment, controlling ±2 mm side shift.

  • The hinge comes pre-marked for:

    • Door side: screw positions and mortise depth (32 mm wide)

    • Jamb side: slightly wider mortise (34 mm)

  • This image is essential for precise installation and fine-tuning after mounting.

Screenshot 2025-06-17 091854.png

This diagram shows the hinge's operating range and adjustment capability once installed:

  • The hinge allows a full 180° door opening, ideal for wide access in commercial and residential spaces.

  • The split-hinge design (door-side and jamb-side) simplifies installation and allows the door to be temporarily hung before final fixing.

  • Post-installation adjustments:

    • Horizontal: ±2 mm

    • Vertical: +3 mm

    • Depth: +1 mm / –1 mm

  • The minimal clearance (17.7 mm) between the pivot and the door face ensures flush closing without protrusion.

Screenshot 2025-06-17 091824.png

This view shows the door and jamb cut-out dimensions required to seat the hinge correctly:

  • Door cut-out:

    • Height: 190 mm

    • Width: 32 mm

    • Depth: 28 mm

  • Jamb cut-out:

    • Height: 190 mm

    • Width: 34 mm

    • Depth: 28 mm

  • Radius corners require 8 mm radius cutting (R6), suitable for standard hinge routers or jigs.

  • Proper alignment ensures the concealed fit and structural integrity of the hinge system.

CONTACT

Send us a message and we’ll get back to you shortly.

Inquiries

For any inquiries, questions or commendations, please call: 08 9333 4999 or fill out the contact form

Navigate

Office & Warehouse

274 Welshpool Road Welshpool, WA 6106

sales@nessco.com.au

Tel: 08 9333 4999

28 Indian Drive Keysborough, VIC 3173

vicsales@nessco.com.au

Tel: 03 9706 8400

© 2025 Nessco Trade Supplies

© 2025 Nessco Trade Supplies

  • Facebook
  • Linkedin
  • Instagram
  • Youtube
bottom of page