top of page
HES HINGES

Explore the HES3D-E160 Concealed Hinge

The HES3D-E160 is a heavy-duty, 3-way adjustable concealed hinge designed for large interior doors requiring both a premium finish and robust performance. Its shallow mortise depth simplifies installation, while the two-part split design makes mounting easier and more precise. Ideal for high-use residential and commercial applications, the E160 ensures a flush, sag-resistant fit that maintains its alignment over time.

  • Shallow drilling depth (15.2 mm) allows for easier mortising of door and jamb.

  • 3-Way post-installation adjustment: Fine-tune vertically (±3 mm), horizontally (±2 mm), and in depth (±1 mm) after mounting.

  • Split hinge design: Divides into two parts (door-side and jamb-side) for simplified door hanging.

  • Sag-prevention structure: Engineered to resist door sag over time, ideal for taller and heavier doors.

  • Optional screw covers available if originals are lost or damaged (contact us for replacements).

Specifications:
  • Opening Angle: 180°

  • Max Door Dimensions: Width 900mm, Height 2400mm

  • Door Thickness: 36mm minimum

  • Weight Capacity: 55kg with 2 hinges, 70kg with 3 hinges

  • Tested Durability: 300,000 open/close cycles

  • Mounting Style: Concealed, split-type with wide-throw design

 

Available Finishes:
image.png

Installation Instructions

image.png

The HES3D-E160 offers three-axis adjustment to ensure a perfectly aligned and smooth door operation:

 

  • Horizontal Adjustment: ±3 mm (screw on the door side)

  • Vertical Adjustment: ±3 mm (screw on the jamb side)

  • Depth Adjustment: ±1 mm (central screw near pivot)

 

These adjustments can be made after installation using a standard screwdriver, enabling precise door positioning without removing the hinge body. Ensure all fixing screws are tightened after alignment.

Ensure the door and jamb reference planes are correctly aligned during installation. The hinge body must sit 15.2 mm from the door reference plane, with a 3.5 mm spacing between the hinge arm and the door edge. Maintain the indicated clearance values (X = 3 mm and Y = 3 mm) for smooth, flush operation. These clearances are critical for the hinge’s concealed design and to prevent binding during operation.

image.png
image.png

Fine-tune your door installation using the built-in adjustment screws:

  • Depth Adjustment: ±1 mm allows the door to move in or out relative to the frame.

  • Horizontal Adjustment: +3 mm / -2 mm enables lateral door positioning.
    These features allow for seamless flush fitting and can compensate for slight installation inaccuracies or material movement over time

This diagram illustrates the precise cut-out dimensions required for installing the HES3D-E160 hinge on both the door and jamb sides.

  • Door Side (Left):
    Cut a mortise measuring 160 mm (height) × 30 mm (width) and 8.8 mm deep.
    Ensure the mortise is positioned 25 mm from the door edge and 10 mm from the reference plane.

  • Jamb Side (Right):
    Mirror the same mortise cut-out—160 mm × 30 mm × 8.8 mm deep, aligned 25 mm from the jamb edge and 10 mm from the reference plane.

 

Note: Precision in these measurements is essential to ensure a flush fit and proper hinge function. Use the provided installation template for accuracy.

image.png

CONTACT

Send us a message and we’ll get back to you shortly.

Inquiries

For any inquiries, questions or commendations, please call: 08 9333 4999 or fill out the contact form

Navigate

Office & Warehouse

274 Welshpool Road Welshpool, WA 6106

sales@nessco.com.au

Tel: 08 9333 4999

28 Indian Drive Keysborough, VIC 3173

vicsales@nessco.com.au

Tel: 03 9706 8400

© 2025 Nessco Trade Supplies

© 2025 Nessco Trade Supplies

  • Facebook
  • Linkedin
  • Instagram
  • Youtube
bottom of page